Product Brief
Maintenance potential fault diagnosis of electrical, electronic mechanical equipment. Predictive preventive maintenance at industrial sites. Thermal (liquid leakage / energy consumption).
technical parameter
project | Parameter |
detector | 384*288pixel50/60hz |
Spectral range | 8~14 pm |
Thermal sensitivity | 0.06°C@30°C |
temperature | -20°C~650°C (1200°C可选) |
Optical lens | FOV: 25°*19° focusing:0.1ml FOV: 1.36mrad |
Monitor | 320*240colour |
Emissivity calibration | 0.01 ~ 1.00 Adjustable |
Power Supply | 4 hours continuous use of lithium battery (charging) |
storage | 8g (optional 16g) memory card |
What's the difference between night vision thermal imaging? The following OCS Inspection section explains in detail:
1. Effectiveness
1) If you have used the ordinary night vision instrument, you will find that the night vision instrument the ordinary infrared thermal imager, the observation feeling is completely different. This is because the general night vision instrument is to directly observe the target through the lens, so the field of view is the same as that seen by the telescope lens, which is circular, the picture is green. If the clarity is enough, it is able to identify who the character's target is see the five features of the person clearly.
2) Infrared night vision thermal imager can see the image on the internal LCD screen, rather than directly see the target, so the field of vision is square. According to the temperature distribution, the higher the temperature is, the greater the brightness will be. On the contrary, the lower the temperature is, the darker the color will be. The main purpose of the infrared night vision thermal imager is to find the target identify the target category, such as the target is human, animal, etc.
2. Influence of light factor
1) Because of the imaging principle, the second generation + night vision instrument is greatly affected by the environment. In particular, the observation distance will be shortened when the light is dimmed. In the case of all black, the auxiliary infrared light source must be used, the distance of the auxiliary infrared light source is generally only 100 meters. At the same time, they are afraid of strong light, although many traditional night vision instruments are protected by strong light. However, if the ambient brightness changes greatly, it will have a great impact on the observation.
2) Infrared thermal imaging night vision instrument, will be affected by light. No matter in the daytime at night in rainy, snowy foggy days, the target object can be clearly observed. For this reason, Ding class vehicle night vision instruments, such as Mercedes Benz BMW, all use infrared thermal imagers.
Sichuan Xinda Rail transportation Equipment Co., Ltd
Mobile: 15681986617
Website: www.xdailway.com
Email: scxd@vip.163.com
Xinda post: w621000
Tel: 0816-2349834
Address: No. 507, building 2, innovation center, science Technology Innovation Zone, Mianyang City
Scan pay attention to us